Skamol Corner

Skamol Corner

Skamol Corner is a corner protector.

  1. Skamol Corner can be cut to the desired length. This is easily done with snips or scissors.

  2. Remove dust from the surface of the mounted SkamoWall Board.

  3. Apply Skamol Primer to the surface of the SkamoWall Board where the Skamol Corner is to be placed.

  4. Wait approx. 30 minutes for Skamol Primer to dry.

  5. Apply a layer of plaster to the SkamoWall Board where the Skamol Corner is to be placed. Choose between Skamol Lime Mortar and Skamol Smooth Plaster.

  6. Press Skamol Corner into the wet plaster.

  7. Smooth out any excess plaster.

  8. Wait approx. 30 minutes for the plaster to harden.

  9. Apply plaster to the entire surface of the SkamoWall Board.

 

Find out more about mounting here.

Box contents

0 to 50pcs. (2,500 × 60 × 60mm)

Over 50pcs. (2,500 × 165 × 90mm)


Corner protector size

2,500 × 25 × 25mm


Yield

250cm


Storage

No requirements for storage conditions.


Contains

PVC

Dispose of Skamol Corner in accordance with local regulations.

Other SkamoWall products

SkamoWall Board

SkamoWall Board

SkamoWall Board is a calcium silicate board that ensures an improved indoor climate. SkamoWall Board must be mounted with the associated system-specific products to ensure the best results and to validate the warranty. All SkamoWall calcium silicate products have an EPD (Environment Product Declaration) which has been verified by a third party and published through EPD Denmark.

SkamoWall Bore

SkamoWall Bore

SkamoWall Bore is a bore used at the sides and top of windows. Like SkamoWall Board and SkamoWall Wedge, SkamoWall Bore is made of calcium silicate, which ensures an improved indoor climate. All SkamoWall calcium silicate products have an EPD (Environment Product Declaration), which has been verified by a third party and published through EPD Denmark.

Skamol Mesh

Skamol Mesh

Skamol Mesh is a reinforcing mesh used only when mounting SkamoWall in buildings exposed to many major vibrations such as railroad tracks.

Skamol Primer

Skamol Primer

Skamol Primer is a ready-to-use primer that is applied to SkamoWall Board on the side to which the plaster is to be applied. Skamol Primer is a water-soluble primer made from colloidal silica. Skamol Primer improves adhesion and thus forms a good foundation for subsequent treatment. It should not be used if the temperature is below 5°C. Store the product in its original, unopened packaging in a cool, but frostproof place. It can be used for 24 months from the date of manufacture indicated on the packaging. The product is ready for use. 1L is sufficient for 5m². Drying time is approximately 30 minutes.

Skamol Smooth Plaster

Skamol Smooth Plaster

Skamol Smooth Plaster is a ready-to-use smooth plaster to be used together with the calcium silicate SkamoWall Board. A 15kg bag must be mixed with approximately 5.5L to 6.5L of water, yielding around 7.5m² with a thickness of 2mm. Use clean tools and make sure that the surface of the substrate is primed and free of dust before applying the plaster. The work must be carried out within a temperature range of +5°C to +25°C. Store the product in the original packaging in a dry and dark place. Protect against moisture and negative temperatures.

SkamoWall Wedge

SkamoWall Wedge

SkamoWall Wedge is a wedge used as a border between the wall and ceiling. Similar to SkamoWall Board and SkamoWall Bore, SkamoWall Wedge is made of calcium silicate, which ensures an improved indoor climate. All SkamoWall calcium silicate products have an EPD (Environment Product Declaration), which has been verified by a third party and published through EPD Denmark.

Skamol Lime Mortar

Skamol Lime Mortar

Skamol Lime Mortar is a lime-based ready-to-use product that can be used as both an adhesive and plaster when mounting SkamoWall. Mix a 20kg bag with approx. 4.5L of clean water for about 7 minutes, yielding 2.5m² as an adhesive (7mm) or 7m² as plaster (2mm). The work must be carried out within a temperature range of +5°C to +25°C. Use clean tools and make sure that the surface of the substrate is free of dust before applying the product. Store the product in its original packaging in a dry and dark place. Protect against moisture and negative temperatures.