How to use

• To ensure a perfect surface, it is important that the tools, mixing baskets and water are free of dust and foreign objects of any kind.
  
  
• Remove dust from the surface of the SkamoWall Board.
  
  
• Use Skamol Primer on the surfaces of SkamoWall Board where Skamol Structural Plaster is to be applied.
  
  
• Skamol Structural Plaster is mixed in the ratio of 3.6 to 4.1L water per 20kg bag:
  
  • Pour 2.5L of water into a mixing bucket.
  • Stir vigorously and add the entire content of the Skamol Structural Plaster bag (20kg).
  • Add the remaining 1.1 to 1.6L of water to the mixture until the desired consistency is achieved.
  • Mix vigorously for at least 5 minutes.
  • After mixing, Skamol Structural Plaster can be used for 30 to 60 minutes.
    
    
• Skamol Structural Plaster is applied to the SkamoWall Board with a notched trowel to achieve an even layer thickness (2 to 8mm). The plaster is then straightened.
  
  
• No later than the day (at 20°C) after, the Skamol Structural Plaster is hardened and may be painted:
  Priming with DYRUP Silicate Primer V diluted 1:1 with water.
  Treatment 2 × DYRUP Indoor Silicate paint – Dilute any first layer with max. 10% DYRUP Silicate Primer V or water.

Bag content

20kg
Grain size: 1 to 2mm

Bag size

400 × 250 × 120mm

Yield

7.5m² (2mm)

Storage

Store in a cool place, protected from frost.

Contains

• Portland cement
• Calcium hydroxide