If you have a question regarding SkamoWall, we have collected a number of the most frequently asked questions here.
Only ordinary hand tools are required.
See which at https://www.skamowall.com/how-to/
Yes.
See how at https://www.skamowall.com/how-to/
No.
Thus the warranty lapses.
SkamoWall can be used in bathrooms with the condition that the splashing area is covered with tiles. At least 50cm above or next to the splashing area should be clear of tiles.
Calculate it at https://www.skamowall.com/calculator/
Learn how to at https://www.skamowall.com/how-to/
No.
There is no special safety equipment required, but it is advised to check the safety datasheet for instructions.
Improved indoor climate by regulating moisture and removing mold growth.
Skamol Adhesive and SkamoWall Board.
Do not use other brands with SkamoWall.
See retailers at https://www.skamowall.com/dealers/
In extreme cases, it will be visible.
The board is screw-friendly.
Learn more at https://www.skamowall.com/skamowall-basic/technical-information/screw-friendly-system/
Standard dimension is 1,000 × 610mm.
Other dimensions available up to 2,440 × 1,220mm.
Standard thicknesses are 25, 30, 50, and 100mm.
Other thicknesses available ranging from 20 to 105mm.
R = 0.37.
U = 2.72.
R = 0.74.
U = 1.36.
R = 1.47.
U = 0.68.
SkamoWall Basic Smooth Plaster is a smooth plaster.
Skamol Structural Plaster coarse-grained plaster (up to 2mm).
The grain size is up to 2mm.
Yes.
See how at https://www.skamowall.com/how-to/
Yes.
However, a bituminous membrane must be placed between SkamoWall and the truss.
Yes.
However, the skeleton wall must be made of an inorganic material.
Yes.
However, a bituminous membrane must be placed between SkamoWall and the wood.
No.
Either 5mm free space or 5mm with an inorganic elastic material.
Yes.
Yes.
Yes.
Only the side of the SkamoWall Board which will be plastered needs to be primed.
No.
Most often, the best result is obtained by laying several thin layers on top of each other.
Tar, paint residues and other organic material must be removed.
Unevenness must not be greater than 15mm.
Bumps up to 15mm bumps can be corrected with Skamol Adhesive.
No.
Skamol Mesh should only be used in cases where the walls are exposed to vibrations from e.g. train tracks.
No.
No.
No.
However, if Skamol Smooth Plaster or Skamol Structural Plaster is applied, you can paint.
Yes.
The combination of DYRUP Silicate Primer V and DYRUP Indoor Silicate Paint is recommended.
Read more at https://www.skamowall.com/technical-information/paint/
No.
Skamol recommends a stainless steel nail.
Yes.
We recommend a combination of DYRUP Silicate Primer V and DYRUP Indoor Silicate Paint is recommended.
Read more at https://www.skamowall.com/technical-information/paint/
Skamol recommends a stainless steel screw.